1. Plasticware Lab Supplies For Sale
  2. sku: 13368220174127751
  3. OBJECTIVE FS360-75-15-D-5

NEW OBJECTIVE FS360-75-15-D-5 Picotip Emitter Silicatip

Fs360-75-15-d-5 New Objective 5 Pk Picotip Emitter Silicatip Brand

( Brand: New Objective ), ( Manufacturer Part Number: FS360-75-15-D-5 ), ( Model: PICOTIP )

Review NEW OBJECTIVE Pk Picotip Emitter Silicatip

The **Objective FS360-75-15-D-5 Picotip Emitter Silicatip** is a high-performance, precision-engineered fluidic component designed for demanding applications in microfluidics, lab-on-a-chip systems, and advanced fluid dispensing. This emitter combines cutting-edge silicon microfabrication with a robust, durable Picotip design to deliver exceptional control over fluid flow rates, enabling ultra-fine droplet generation, precise liquid handling, and reliable operation in research, biotechnology, and industrial automation. The **FS360** designation indicates a flow rate capability of up to **360 microliters per minute**, making it suitable for both low-volume dispensing and moderate-throughput applications, while the **75-micron orifice diameter** ensures a consistent, narrow fluid jet with minimal shear forces, reducing sample degradation and improving accuracy. The **15-degree bevel angle** of the emitter tip enhances fluidic efficiency by promoting laminar flow and reducing clogging, while the **D-5** variant incorporates a **silicatip**, a specialized silicon-based tip material that offers superior chemical resistance, thermal stability, and compatibility with a wide range of solvents, buffers, and biological fluids, including aggressive reagents like acids, bases, and organic solvents. This emitter is particularly well-suited for applications requiring high precision, such as **DNA/RNA droplet generation, cell encapsulation, material deposition, and surface patterning**, where consistency and repeatability are critical. The Picotip design further enhances its versatility by allowing for easy integration into automated systems, robotic platforms, or manual pipetting setups, while its compact and lightweight construction minimizes dead volume and maximizes fluidic responsiveness. Whether used in **bioprinting, drug discovery, or microfabrication**, the FS360-75-15-D-5 Silicatip emitter delivers unmatched performance, ensuring reliable, high-resolution fluid control in even the most exacting experimental conditions.

### **Pros and Cons of buying a Objective FS360-75-15-D-5 Picotip Emitter (Silicatip)**

#### **Pros**

1. **High Precision and Consistency** The FS360 series is designed for high-resolution fluid dispensing, making it suitable for applications requiring precise droplet control, such as cell culture, microdispensing, or lab automation. The 75-micron tip size ensures fine, controlled fluid delivery.

2. **Compatibility with Objective s Dispensing Systems** This emitter is engineered to work seamlessly with Objective s fluid dispensing platforms, including the FS360 series, which are widely used in research and industrial settings. This ensures optimized performance and reduced risk of compatibility issues.

3. **Durability and Longevity** Made from **silicatip (silicone-based material)**, this emitter is resistant to wear and tear, chemical degradation, and clogging compared to some plastic or glass alternatives. It can handle repeated use without frequent replacements.

4. **Wide Range of Applications** Suitable for dispensing a variety of fluids, including cell culture media, reagents, adhesives, and even some viscous liquids (within the emitter s specified limits). The 15-degree angle tip design allows for better control over droplet formation and deposition.

5. **Low Maintenance** Unlike some disposable tips, this emitter can be cleaned and reused multiple times, reducing waste and operational costs in long-term use. Objective provides cleaning protocols to extend its lifespan.

6. **Backed by Objective s Reputation** Objective is a trusted brand in precision fluid dispensing, known for reliability and technical support. Their products are commonly used in academic, biotech, and industrial research environments.

7. **Adjustable Flow Rates** The FS360 system allows for fine-tuning of dispensing parameters, enabling users to optimize flow rates for specific applications, which enhances flexibility.

---

#### **Cons**

1. **Cost** Compared to generic or disposable tips, this emitter is relatively expensive. The initial investment may be higher, though its durability could offset costs over time.

2. **Specialized Cleaning Requirements** Silicone tips require proper cleaning (e.g., with detergents or ultrasonic baths) to prevent contamination or clogging. Improper cleaning can reduce performance or shorten the emitter s lifespan.

3. **Limited Fluid Compatibility** While it works well with many liquids, highly abrasive, particulate-laden, or extremely viscous fluids may still cause wear or clogging over time. Always check Objective s guidelines for fluid compatibility.

4. **Not Disposable** Unlike single-use tips, this emitter must be cleaned and stored properly between uses. This adds an extra step to workflows that may not account for maintenance.

5. **Dependence on Objective s Hardware** The emitter is optimized for Objective s dispensing systems. If switching to a different brand s platform, performance may not be as reliable.

6. **Potential for Tip Damage** Improper handling (e.g., bending, rough cleaning, or contact with sharp edges) can damage the tip, leading to inconsistent dispensing or failure.

7. **Learning Curve** Users unfamiliar with precision dispensing systems may require training to maximize the emitter s performance, especially in optimizing flow rates and pressure settings.

---

### **Conclusion**

The **Objective FS360-75-15-D-5 Picotip Emitter (Silicatip)** is a high-quality, durable, and precise tool ideal for applications demanding fine fluid control, such as cell culture, microdispensing, or automated lab processes. Its compatibility with Objective s systems, resistance to wear, and reusability make it a cost-effective choice for long-term use in research or industrial settings. However, its higher upfront cost, maintenance requirements, and specialized cleaning needs may pose challenges for users with limited budgets or workflows that prioritize simplicity over durability.

For **users who prioritize precision, consistency, and longevity** particularly in controlled environments like biotech labs or research facilities this emitter is a strong recommendation. For **budget-conscious users or those dispensing highly abrasive fluids**, alternatives like disposable tips or lower-cost generic emitters may be more suitable.

### **Recommendation**

**Buy the Objective FS360-75-15-D-5 Picotip Emitter if:**

- You require **high-precision fluid dispensing** for research, cell culture, or automated processes.

- You are already using or plan to use **Objective s dispensing systems** (e.g., FS360).

- You can **commit to proper cleaning and maintenance** to extend its lifespan.

- Your workflow benefits from **durability and reusability** over disposable tips.

**Consider alternatives if:**

- Your budget is tight, and you can tolerate **disposable tips** with lower precision.

- You are dispensing **highly abrasive or particulate fluids** that may damage silicone tips.

- You lack the **time or infrastructure** for proper emitter cleaning and storage.

For most **serious users of precision fluid dispensing**, this emitter is a worthwhile investment due to its reliability and performance.

Details:

Brand new and fast free shipping.

part #: fs3607515d5 price

  • $149.99

specifications plasticwarelabsuppy:

  • brand: New Objective
  • mpn: Fs360-75-15-d-5
  • model: Picotip

shipping plasticwarelabsuppy:

  • carrier: USPS
  • cost: $0.00
  • type: Fixed
  • service: USPS Priority Mail
  • class: Expedited
  • transit: 4-10 Days

returns plasticwarelabsuppy:

  • policy: Returns Accepted
  • time: 14 Days
  • paid by: Buyer
  • method: Money back

payments plasticwarelabsuppy:

  • credit card: Mastercard
  • wallet: Paypal
  • other

offer plasticwarelabsuppy:

  • sold: 0
  • started: March 3, 2026
  • quantity: 1
  • availability: In Stock
  • best offers: True
  • options: Ship-to-home

seller plasticwarelabsuppy:

  • rating: 100.0%
  • # reviews: 9845
  • city: Palmer, Massachusetts

general plasticwarelabsuppy:

  • Medical, Lab Dental Supplies > Glassware Plasticware > Other Medical Lab Glassware
  • condition: New
category: business & industrial > medical, lab dental supplies > glassware plasticware > medical lab glassware, sku: 13368220174127751,
New Objective FS360-75-15-D-5 Is Similar To:
plasticwarelabsuppy logo
1 offer $149.99 USD
  • New. Offer #1 priced at $149.99 + $0.00 shipping estimate = $149.99* total. Brand new and fast free shipping.FREE SHIPPING

Copyright © plasticwarelabsuppy.com